Το Bowers & Wilkins 603 S3, HTM6 S3 και 607 S3 ειναι πακετο ηχειων για home cinema.

Δεν περιλαμβανονται οι βασεις δαπεδου στην τιμη.Stand/s not included.

Εγγυηση Αντιπροσωπειας. Δυνατοτητα δοσεων.

Bowers & Wilkins 607 S3 Specifications

• 2-way vented-box system
• Decoupled Double Dome Titanium tweeter
• Continuum™ cone bass / midrange
• Flowport™
• Drive units 1x ø25mm (1 in) Titanium Dome high-frequency, 1x ø130mm (5 in) Continuum cone bass / midrange
• Frequency range -6dB 40Hz - 33kHz
• Frequency response (+/-3dB from reference axis) 52Hz - 28kHz ±3dB
• Sensitivity (on axis at 2.83Vrms at 1m) 84dB
• Harmonic distortion 2nd and 3rd harmonics (90dB, 1m on axis) <1% 100Hz - 22kHz, <0.5% 500Hz - 10kHz
• Nominal impedance 8? (minimum 3.0?)
• Recommended amplifier power 30W - 100W into 8Ω on unclipped programme
• Max recommended cable impedance 0.1?
• Cabinet finishes Black, White, Oak
• Grille finishes Black (Black), Grey (White and Oak)
• Dimensions HWD 300mm x 165mm x 235mm
• Weight 4.65 kg

Bowers & Wilkins HTM6 S3 Specifications

• 2-way vented-box system
• Decoupled Double Dome Titanium tweeter
• Continuum™ cone bass / midrange
• Flowport™
• Drive units 1x ø25mm (1 in) Titanium Dome high-frequency, 1x ø130mm (5 in) Continuum cone bass / midrange
• Frequency range -6dB 42Hz - 33kHz
• Frequency response (+/-3dB from reference axis) 72Hz - 28kHz ±3dB
• Sensitivity (on axis at 2.83Vrms at 1m) 87dB
• Harmonic distortion 2nd and 3rd harmonics (90dB, 1m on axis) <1% 100Hz - 22kHz, <0.5% 100Hz - 12kHz
• Nominal impedance 8Ω (minimum 4.3Ω)
• Recommended amplifier power 30W - 120W into 8Ω on unclipped programme
• Max recommended cable impedance 0.1Ω
• Cabinet finishes Black, White, Oak
• Grille finishes Black (Black), Grey (White and Oak)
• Dimensions HWD 160mm x 480mm x 283mm
• Weight 7.7 kg

Bowers & Wilkins 603 S3 Specifications

• 3-way design
• 1" Decoupled Double Dome titanium tweeter
• 6" Continuum™ cone FST (Fixed Suspension Transducer) midrange
• dual 6-1/2" paper cone woofers
• bass-reflex cabinet with rear-firing Flowport™
• frequency response: 46-28,000 Hz (± 3 dB)
• sensitivity: 90 dB
• impedance: 8 ohms
• recommended amplifier power: 30-200 watts
• dual binding post speaker terminals allow bi-amping or bi-wiring
• included plinth and carpet spikes provide added stability
• acoustically transparent, removable magnetic grille
• H 102 x W 26 x D 40.2 (with plinth and spikes)
• weight: 27.5 kg each

Bowers & Wilkins 603 S3 What's in the box:

• Floorstanding loudspeaker
• Grille
• Plinith (base)
• 2 Jumper-straps (pre-installed)
• 4 Rubber feet
• 4 Spike feet
• 4 Hex-nuts
• 4 Screws
• 4 Washers
• 4 Lock-washers
• Two-piece foam port plug
• Hex-key
• Manual
• Safety & Warranty Booklet
• Online Registration Card